It is safe for the user
It is environmentally-friendly
It does not require a high capital investment
It is a self-regulating process
Parts cleaning responds to the growing desire to eliminate
liquid waste streams in the form of used solvents, saturated
with hydrocarbons, that need to be disposed of on a regular
basis. For these applications, a very specific type of microorganism
has been selected, which digests a variety of hydrocarbons
typically found in industrial MRO applications in the form
of oils, lubricants and greases.
Safe and effective
The parts cleaner process not only eliminates the unwanted
hydrocarbons but, at the same time, maintains the cleaning
power of the solution, eliminating the need for frequent cleaner
replacement. Thus, a water-based cleaning solution that also
combines bioremediation is the safest and most effective alternative
to parts cleaning systems with solvents, even when compared
to other alternatives such as biosolvents or traditional water-based
cleaners.
The major advantages of parts cleaning
:
it is environmentally-friendly
it does not require a high capital investment
it is a self-regulating process
Parts cleaning
Parts cleaner systems performance is a combination of
several factors. In most cases Bio-Circle's cleaner systems
performance comes close to solvents, relying on three key
components:
Bio-Circle L is pH neutral, formulated with cutting-edge cleaning
agents and has the strength to effectively break the bond
between the part and oil/grease.
Once the oil/grease is separated it is then encapsulated ensuring
parts remain clean.
Mechanical action increases speed
The flow of liquid is combined with a hard bristle brush to
clean faster and dislodge oil/grease within configuration
of parts.
Heated liquid
Bio-Circle L solution is maintained at 37oC (100oF) greatly
increasing the cleaner power and operator comfort. PARTS CLEANER APPLIED TO MANUAL PARTS CLEANING SYSTEMS
It is only more recently that parts
cleaner systems was applied successfully with water-bases
cleaners as an alternative to industrial with solvent. It
is important to state that the bioremediation process does
not clean the part; it takes place only once the parts cleaner
agents have separated the contaminants.
Parts cleaner responds to the growing desire to eliminate
liquid waste streams in the form of used solvent, saturated
with hydrocarbons, that needs to be disposed of on a regular
a basis.
For these applications, a very specific
type of microorganisms has been selected, which digests
a variety of hydrocarbons typically found in industrial
MRO applications in the form of oils, lubricants and greases.
SAFE AND EFFECTIVE
In order to maximize the digestive activity
to the point where the rate of remediation is sufficient
to cope with the amount of hydrocarbons that are generated
by daily parts washing activity, the solution is maintained
at ideal conditions for temperature and aeration.
