Parts whasers applied to manual parts cleaning systems
The major advantages of parts washers:
It is safe for the user
It is environmentally-friendly
It does not require a high capital investment
It is a self-regulating process
Parts washer systems responds to the growing desire to eliminate
liquid waste streams in the form of used solvents, saturated
with hydrocarbons, that need to be disposed of on a regular
basis. For these applications, a very specific type of microorganism
has been selected, which digests a variety of hydrocarbons
typically found in industrial MRO applications in the form
of oils, lubricants and greases.
Safe and effective
The parts washers process not only eliminates the unwanted
hydrocarbons but, at the same time, maintains the parts cleaners
washers of the solution, eliminating the need for frequent
cleaner replacement. Thus, a water-based cleaning solution
that also combines bioremediation is the safest and most effective
alternative to parts washers systems with solvents, even when
compared to other alternatives such as biosolvents or traditional
water-based cleaners.
The major advantages of parts washers:
it is environmentally-friendly
it does not require a high capital investment
it is a self-regulating process
Parts washers
Parts washers performance is a combination of several
factors. In most cases Bio-Circle's cleaning systems performance
comes close to solvents, relying on three key components:
Highly efficient cleaning
Bio-Circle L is pH neutral, formulated with cutting-edge cleaning
agents and has the strength to effectively break the bond
between the part and oil/grease.
Once the oil/grease is separated it is then encapsulated ensuring
parts remain clean.
Mechanical action increases speed
The flow of liquid is combined with a hard bristle brush to
clean faster and dislodge oil/grease within configuration
of parts.
Heated liquid
Bio-Circle L solution is maintained at 37oC (100oF) greatly
increasing the cleaning power and operator comfort. METAL CLEANING APPLIED TO MANUAL PARTS CLEANING SYSTEMS
It is only more recently that cleaning
systems was applied successfully with water-bases cleaners
as an alternative to industrial parts cleaning with solvent.
It is important to state that the bioremediation process
does not clean the part; it takes place only once the cleaning
agents have separated the contaminants from the parts.
Cleaning systems responds to the growing desire to eliminate
liquid waste streams in the form of used solvent, saturated
with hydrocarbons, that needs to be disposed of on a regular
a basis. For these applications, a very specific type of
microorganisms has been selected, which digests a variety
of hydrocarbons typically found in industrial MRO applications
in the form of oils, lubricants and greases.
SAFE AND EFFECTIVE
In order to maximize the digestive activity
to the point where the rate of remediation is sufficient
to cope with the amount of hydrocarbons that are generated
by daily parts washing activity, the solution is maintained
at ideal conditions for temperature and aeration.
